http://f1.grp.yahoofs.com/v1/4O2QRoSMC3246AGhBi3eDIN0VnpsfasOi_sv-QicGk4ECjHYLXz_DHlD-KNTuVMG1QZPGP2H0UmcGp6zXZsTqlhyPFfDeReu7uY/Magnetic_Motor.pdf 
http://lapierreangulaire.free.fr/doc/DopageVitry.pdf verdampfer für wasserauto 
FR- http://lapierreangulaire.free.fr/doc/DopageVitry.pdf 
http://www.google.com/custom?domains=http%3A%2F%2Fwww.keelynet.com%2F&q=keely+water+stimulation+with+ultrasonics&sa=Search&sitesearch=http%3A%2F%2Fwww.keelynet.com&client=pub-5062770644724806&forid=1&ie=ISO-8859-1&oe=ISO-8859-1&cof=GALT%3A%23003324%3BGL%3A1%3BDIV%3A%2366CC99%3BVLC%3AFF6600%3BAH%3Acenter%3BBGC%3AC5DBCF%3BLBGC%3A73B59C%3BALC%3A000000%3BLC%3A000000%3BT%3A330033%3BGFNT%3A333300%3BGIMP%3A333300%3BFORID%3A1%3B&hl=en 
keelenet water hydrogen Hi, It used to be my opinion that ultrasonics would not 
cause disassociation of the water molecule. Ultrasonic jewelry cleaners appear 
to confirm that by just causing cavitation. However, in the last few days I have 
been informed by a most reliable source, that it can happen. I am trying to get 
further specific details, but the information to hand at present is: The 
technique is to take two tubes of 384L stainless steel and glue an ultrasonic 
transducer between them. The resonation takes place at 2.24 MHz at 3.5 volts 
with a current draw of 3 mA (input power 10.5 milliwatts !!). The tubes are 
ground down to resonate at that frequency and when they do, they produce enough 
hydroxy gas to run a vehicle engine. The hydroxy production rate was described 
as "violent". It seems almost certain to me that no metal tube of any practical 
size is going to resonate at 2.24 MHz. Resonance of a tube is presumably 
affected by diameter, length, thickness, material and manufacturing defects. 
Presumably, therefore, the tubes are resonating at a lower harmonic of the 2.24 
MHz. I visualised this device as having a figure of eight shape when viewed from 
the top, with the transducer being glued between two identical tubes. However, 
my source thinks that there were two transducers, and he visualised the tubes 
being one inside the other. I'm sure that several of you good people out there 
will want to test this out for yourselves and experiment. However, please be 
aware that the oil companies are so afraid of this system that they will go to 
any lengths to stop it being publicised. So if you do get this system working, I 
suggest that you are very careful what you say about your success. Good luck, 
Patrick "Patrick Kelly" » ----------------- Hi, have you tried the Keely 
frequency? II think it's 42.8 kHz. There was an interesting article on keelynet 
about an experiment. They sonically stimulated water in a cilinder, apparently 
when the freq (wich was set for upward sweeping), was around 42.8 kHz the water 
disappeared instantly, when the guy looked up there was a hole the size of the 
cilinder in the ceiling! Keely did some amazing stuff with water and freq. If I 
find the link I'll post it. regards Mario --- tony tiger wrote: > Hi all, > > 
Just got some new lab equipment! A medical > ultrasound unit and a DC shoch unit 
for I am > assuming muscle stimulation. > > I will need to tweek the ultrasound 
unit a bit, but > have already gotten some interesting results with > it. > > I 
know this is slightly different than what the > accepted concept here is, but my 
research implies > very strongly that the water molecule is NOT > responding to 
the electron flow as much as it is > responding to the violent physical shaking 
it > experiences at the atomic level as the electrons > collide under the force 
of the energy rushing from > electrode to electrode. > > Thus this shaking 
process or oscillation if timed > correctly will build up internally to the 
molecule > and develop a chain reaction which destroys the bond > between the 
atoms thus resulting in dissociation. > > We know that the circuits MUST be 
TUNED > harmonically.... > > To our non atomic naked eyes all we see is the > 
bubbles and the wires and the battery... but there > are claims of massive 
dissociation results from > musical input alone... so it all makes sense. > > My 
system is tuned to roughly 1Mhz. I believe I can > safely modify it to control 
the frequency output. > But it will take time as I am VERY busy in other > areas 
of life. > > Like I already said, my initial try it and see tests > were 
successful... on the small scale. Water > droplets immediately exploded into 
mist in an open > configuration which allowed the sound waves to > dissipate 
into the atmosphere unrestrained. > > It should magnify the response if they are 
> contained. > > Anyone out there who knows and understand what I am > doing and 
where I am going, PLEASE contact me. > > Smurf "popo libero" » > 
http://www.geocities.com/ageofmagnetizm/magnetomotive.html 
http://video.google.com/videoplay?docid=6320555275620307180&pr=goog-sl uher 
netzteil z 131 z121 ltd Your affiliate link is: http://affiliates.cjb.net/pese 
Earn $5 for each user who signs up through your affiliate link and orders ad 
removal or file hosting. To view your earnings or update your account 
information, log in at: http://affiliates.cjb.net/